12 FT Tower Windmill Aeration System includes Diffuser and Foot Valve and 100 Ft of 1/2 reg. air line.


These Windmill Aeration Systems includes Air Stone Diffuser and Foot Valve and 100 Ft of 1/2″ reg. air line.
The Outdoor Water Solutions Wind Driven Aeration System offers:
“BalCam II” technology minimizes bearing fatigue with new Stainless Steel components Patent pending new design Fast & Easy Assembly
Manufactured with high quality 18 gauge galvanized steel
Newly redesigned blades and front dome assembly for better air flow
Self-governing head to protect the unit in high winds
New secure locking mechanism that attaches the windmill head to shaft
Larger check valves and upgraded ½” airline to handle the increased air that is produced
High Air Output – 3.0-4.5 CFM rating Rated at 30 psi
Full 5-year warranty on bearings and cams!

Options include the following sizes:
The 12 FT tower is our lowest tower height windmill – works well if you have no trees around and are located in a higher wind area. The windmill compressor and head is the same unit for all tower heights.

16 FT Tower Windmill Aeration System includes Diffuser and Foot Valve and 100 Ft of 1/2 reg. air line.


These Windmill Aeration Systems includes Air Stone Diffuser and Foot Valve and 100 Ft of 1/2″ reg. air line.
The Outdoor Water Solutions Wind Driven Aeration System offers:
“BalCam II” technology minimizes bearing fatigue with new Stainless Steel components Patent pending new design Fast & Easy Assembly
Manufactured with high quality 18 gauge galvanized steel
Newly redesigned blades and front dome assembly for better air flow
Self-governing head to protect the unit in high winds
New secure locking mechanism that attaches the windmill head to shaft
Larger check valves and upgraded ½” airline to handle the increased air that is produced
High Air Output – 3.0-4.5 CFM rating Rated at 30 psi
Full 5-year warranty on bearings and cams!

Options include the following sizes:
The 16 FT tower is our lowest tower height windmill – works well if you have no trees around and are located in a higher wind area. The windmill compressor and head is the same unit for all tower heights.

Want a more Nostalgic look and feel? Our new wooden windmill towers are a masterpiece in design.

Manufactured in the U.S. with a light cedar colored pressure treated wood, this windmill will look great for a long time! Assembled height of the windmill and head is 19′.
Functional Windmill Aeration system comes with the 16′ wooden tower, functional compressor with our patent pending BalCam technology and 5-year warranty, Outdoor Water Solutions Windmill head, 100′ of 1/2″ poly tubing, an airstone and backflow valve.
The blade diameter on all units is a full 73″ in diameter which is the largest windmill head on the market for pond aeration. This allows our units to pump up to 4.5 CFM of air and still turn at low wind speeds due to our windmill heads higher torque. We can also produce up to 30 psi of air allowing these units to aerate ponds or lakes that are 10′, 20′ or even 30′ deep.